LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 3.4L V6 - VIN (E) >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

If journal runout, lobe lift or oil clearance is not within specification, replace camshaft. See CAMSHAFT  table under ENGINE SPECIFICATIONS. If necessary, remove camshaft bearings using Remover/Installer (J-33049).

CAUTION: If camshaft bearings were removed, ensure oil holes are aligned during installation. Front and rear camshaft bearings have a different outside diameter than inner bearings. See CYLINDER BLOCK  table under ENGINE SPECIFICATIONS. If replacing camshaft, coat lobes with Prelube (1052365) prior to installation.
scientia non olet · About LEMON Manuals