Cylinder Block Specifications

CYLINDER BLOCK

Application

In. (mm)

Camshaft Bearing Bore

Front & Rear

2.0090-2.0110 (51.029-51.079)

No. 2 & 3

1.9990-2.0010 (50.775-50.825)

Crankshaft Main Bearing Bore

2.8407-2.8412 (72.155-72.168)

Cylinder Bore

Diameter

3.6228-3.6235 (92.019-92.037)

Maximum Taper

.0004 (.010)

Maximum Out-Of-Round

.0003 (.008)

Maximum Deck Warpage ⁽¹⁾

N/A

⁽¹⁾	Information is not available from manufacturer. DO NOT machine more than .010" (.25 mm) from original surface.