LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 3.4L V6 - VIN (E) >> Overhaul >> Cylinder Block Assembly >> Thrust Bearing

Thrust Bearing

  1. With main bearing cap bolts installed and loosely tightened, pry crankshaft rearward to align bearing caps, then push forward to align rear face of thrust main bearing. Tighten main bearing cap bolts to specification. See TORQUE SPECIFICATIONS .
  2. Measure crankshaft end play. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals