LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 3.4L V6 - VIN (E) >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

Measure piston diameter with pin removed. Measure diameter at 90-degree angle to pin on pin center line. If piston clearance is not within specification, machine cylinder bore and install oversize piston(s) as necessary. See PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS.

scientia non olet · About LEMON Manuals