Pistons, Piston Pins & Piston Rings Specifications
PISTONS, PINS & RINGS
| Application | In. (mm) | ||
|---|---|---|---|
| Pistons | |||
| Clearance | .0013-.0030 (.033-.076) | ||
| Diameter | 3.6209-3.6216 (91.971-91.989) | ||
| Pin Bore | .9057-.9060 (23.005-23.012) | ||
| Pins | |||
| Diameter | .9052-.9054 (22.992-22.997) | ||
| Piston Fit | .0004-.0008 (.010-.020) | ||
| Rod Fit | Press Fit | ||
| Rings | |||
| No. 1 | |||
| End Gap | .006-.014 (.15-.36) | ||
| Side Clearance | .0016-.0030 (.041-.076) | ||
| No. 2 | |||
| End Gap | .019-.029 (.48-.74) | ||
| Side Clearance | .0016-.0035 (.041-.089) | ||
| No. 3 (Oil) | |||
| End Gap | .010-.030 (.25-.76) | ||
| Side Clearance (Max.) | .008 (.20) | ||