LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 3.4L V6 - VIN (E) >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. Coat all components with engine oil. To reassemble, reverse disassembly procedure using NEW pump cover gasket. If installing new pick-up tube, apply Sealant (1050026) to pick-up tube. Install pick-up tube into pump cover using Suction Pipe Installer (J-21882) and plastic hammer.
  2. To install, reverse removal procedure. Ensure pump extension shaft is fully engaged. Tighten oil pump bolt to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals