LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission Removal & Installation) >> Removal & Installation >> Transaxle Brace >> Installation

Transaxle Brace: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transaxle brace.
  2. Hand start the bolts to the engine block and oil pan.
  3. Install the transaxle brace bolts. See Figure . Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
  4. Install the right (rear) engine mount bracket. See ENGINE MOUNT BRACKET (RIGHT SIDE)  .
  5. Install the right front tire and wheel.
  6. Lower the vehicle.
  7. Connect the negative (-) battery cable.
scientia non olet · About LEMON Manuals