LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala Base, 3.8 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission Removal & Installation) >> Removal & Installation >> Air Cleaner Intake Duct >> Installation

Air Cleaner Intake Duct: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Combine the air cleaner intake duct and MAF sensor.
  2. Install the air cleaner intake/MAF assembly on the throttle body (1) and air cleaner cover. See Figure .
  3. Inspect for proper alignment of the air cleaner intake/MAF assembly and tighten the hose clamps. Tighten the air cleaner intake/MAF assembly clamps to specification. See TORQUE SPECIFICATIONS  .
  4. Connect the MAF sensor electrical connector (3). See Figure .