LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Corvette Z06 >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Suspension - Real-Time Damping >> Diagnosis & Testing >> On-Board Diagnostic System >> Automatic Mode

Automatic Mode

  1. Each system module DTC will be displayed for 3 seconds followed by a one second pause before next DTC is displayed in an automatic sequence. If no DTC information is sent to IPC from the system currently displayed, IPC will display NO CODES for that system.
  2. At any time during automatic display function, manual display feature can be activated by pressing any button on the IPC except E/M button. The E/M button is used to completely exit diagnostics mode at any time.
  3. If there is a communications problem between any system, the IPC will display NO COMM when IPC is trying to communicate with that system. When all DTC(s) have been displayed for all systems, IPC will display NO MORE CODES for 2 seconds then will enter manual display mode, waiting for manual mode operation.
scientia non olet · About LEMON Manuals