LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.2 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Body Front End) >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the help of an assistant, position the hood.
  2. Align the hood hinges to the alignment marks on the hood.
    3. NOTE: Refer to FASTENER NOTICE .
    Fig 1: Installing Hood Hinge Bolts
    GM317815Courtesy of GENERAL MOTORS CORP.
  3. Install the bolts which secure the hood hinge to the hood.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  4. Install the hood insulator, if equipped. Refer to Hood Insulator Replacement .
  5. Install the hood latch striker. Refer to Hood Latch Striker Replacement .
  6. Adjust the hood. Refer to Hood Adjustment .
  7. Remove the protective covering from the fenders.
  8. Remove the support and close the hood.
scientia non olet · About LEMON Manuals