Using Scan Tool
WARNING: This page is about a different car, the 1999 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Trouble Codes (DTCs) can also be retrieved using scan tool. Connect scan tool to Data Link Connector (DLC) located under driver-side of instrument panel. Turn ignition switch to ON position. Select Seat Control Module (SCM) on scan tool display. Retrieve and record current and history DTCs and perform appropriate diagnostic test for DTC set. See DIAGNOSTIC TROUBLE CODES (DTCS) table.
DIAGNOSTIC TROUBLE CODES (DTCS)
| DTC | Application |
|---|---|
| B2852 | Column Forward Switch Shorted To Ground |
| B2857 | Column Aft Switch Shorted To Ground |
| B2860 | Column Position Sensor Failure |