Reassembly & Installation
To reassemble, reverse disassembly procedure. Lubricate gears, and fill cavities with petroleum jelly. Install pump cover. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
OIL PUMP SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Gear End Clearance | .0010-.0035 (.025-.089) | |
| Gear Tip Clearance | .006 (.15) | |
| Housing Gear Pocket | ||
| Depth | .4610-.4625 (11.71-11.75) | |
| Diameter | 3.508-3.512 (89.10-89.20) | |
| Outer Gear-To-Housing Clearance | .008-.015 (.20-.38) | |
| Pressure Regulator Valve-To-Bore Clearance | .0015-.0030 (.038-.076) | |