LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Astro Van Cargo, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> System Tests >> Test L: Driver Information Center Compass Inaccurate/C Or Cal Displayed >> Testing

Test L: Driver Information Center Compass Inaccurate/C Or Cal Displayed: Testing

  1. Turn on ignition, with engine off. If compass display is blank, go to step  5 . If compass display is not blank, go to next step.
  2. If "CAL" or "C" is displayed, go to next step. If "CAL" or "C" is not displayed, go to step  4 .
  3. Place Driver Information Center (DIC) compass in calibration mode. See COMPASS CALIBRATION/VARIANCE PROCEDURE  under PROGRAMMING. When calibration is complete, display will return to compass reading. Check operation of compass. If compass does not operate properly, go to step  5 . If compass operates properly, go to next step.
  4. Perform compass variance procedure. See COMPASS CALIBRATION/VARIANCE PROCEDURE  under PROGRAMMING. Check operation of compass. If compass does not operate properly, go to step  5 . If compass operates properly, go to step  6 .
  5. Replace Driver Information Center (DIC) display module. See DRIVER INFORMATION CENTER (DIC) DISPLAY MODULE  under REMOVAL & INSTALLATION. After repairs, go to next step.
  6. Connect all disconnected components. Check system for proper operation. If system operates properly, test is complete. If system does not operate properly, go to step  1 .
scientia non olet · About LEMON Manuals