More Than One Shift Select Button Remains Lit
- If this diagnostic was referred from another test, go to next step. If diagnostic started here, perform FUNCTION TEST under DIAGNOSIS & TESTING, then go to next step.
- If 2HI button remains lit, check for ground in Light Green/Black wire between shift select switch and TCCM. If 4HI button remains lit, check for ground in Tan/Black wire between shift select switch and TCCM. If 4LO button remains lit, check for ground in Purple/White wire between shift select switch and TCCM. If circuit is grounded, go to next step. If circuit is not grounded, see RETRIEVING CODES under DIAGNOSIS & TESTING.
- Ensure ignition is off. Repair ground condition in appropriate wire circuit. Restore system, then go to FUNCTION TEST under DIAGNOSIS & TESTING.