LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1995 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Testing >> Instrument Cluster & Panel Displays >> All Gauges Inoperative

All Gauges Inoperative

  1. Ensure cluster and LCD fuses are okay. With ignition off, remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION  . Connect test light between Pink wire of instrument cluster connector and ground. Turn ignition on, with engine off.
  2. If test light does not light, repair open or short to ground in Pink wire between instrument cluster and CLSTR fuse. If Pink wire was shorted, replace CLSTR fuse. If test light comes on, connect test light between Pink wire and Black wire of instrument cluster connector.
  3. If test light does not light, repair open in Black wire between instrument cluster and ground. If test light comes on, check for poor connections at instrument cluster (bent terminals, etc.). If connections are okay, replace instrument cluster.