LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Astro Van Cargo Extended, 4.3 W, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front Torsion Bar (4WD & AWD) >> Removal & Installation >> Wheel Hub & Bearings >> Installation

Wheel Hub & Bearings: Installation

  1. To install NEW wheel hub stud, lubricate hub bore and install stud. Place 4 washers on stud and install stud nut with flat side to washers. Tighten stud nut to draw stud into hub bore. Remove nut and washers. Install hub and bearing assembly onto drive axle shaft.
  2. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS  . Depress brake pedal several times to extend caliper piston after installation.
scientia non olet · About LEMON Manuals