LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Astro Van Cargo Extended, 4.3 W, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front Torsion Bar (4WD & AWD) >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint-To-Control Arm Nuts (1) 22 (30)
Ball Joint-To-Steering Knuckle Nut (1)(2)
Lower 92 (125)
Upper 63 (85)
Drive Axle Shaft Nut 173 (235)
Drive Axle Shaft-To-Differential Drive Flange Bolts 59 (80)
Hub & Bearing-To-Steering Knuckle Bolts 66 (90)
Lower Control Arm-To-Frame Pivot Bolt Nuts (1)(3)(4) 125 (170)
Shock Absorber Nuts (5) 66 (90)
Splash Shield Bolts 12 (16)
Stabilizer Bar Clamp-To-Frame Bolts 41 (55)
Stabilizer Bar Spacer Bolt 13 (17)
Tie Rod End-To-Steering Knuckle Nut 35 (47)
Torsion Bar Retainer-To-Support Nuts
Center Nut 18 (24)
Edge Nuts 46 (62)
Upper Control Arm-To-Frame Pivot Bolt Nuts (1)(3) 89 (120)
(1) Complete tightening of bolts and/or nuts with vehicle at proper riding height specification.
(2) Tighten nut to align cotter pin hole. DO NOT tighten nut more than an additional 1/6 turn to align cotter pin hole.
(3) Use NEW nuts during reassembly.
(4) Install both bolts with nuts facing rear of vehicle.
(5) Install upper/rear bolt with nut facing rear of vehicle. Install lower/front bolt with nut facing front of vehicle.