LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1994 >> Astro Van Cargo Extended, 4.3 W, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension - Front Torsion Bar (4WD & AWD) >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

  1. Unload torsion bar tension. See Figure . Count exact number of tool turns for reassembly reference.
  2. To install, reverse removal procedure. Install NEW bushings on stabilizer bar. Ensure split in bushing faces toward front of vehicle. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS  . Lower vehicle. Check wheel alignment and adjust ride height. See RIDING HEIGHT article in the WHEEL ALIGNMENT Section.
scientia non olet · About LEMON Manuals