Center Pillar Lower Trim Panel Replacement

WARNING: This page is about a different car, the 2020 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Body Hinge Pillar Garnish Molding Replacement Rear Side Door Sill Garnish Molding Replacement Remove the driver or passenger seat belt anchor plate tensioner cover and fastener. Front Seat Belt Retractor Replacement Move the seat to the full forward position.
1	Center Pillar Lower Trim Panel Assembly Procedure Pull the trim panel toward the inside of the vehicle to disengage the retainers. Ensure the seat belt webbing does not become trapped during installation.

Callout

Component Name

Preliminary Procedures

Body Hinge Pillar Garnish Molding Replacement
Rear Side Door Sill Garnish Molding Replacement
Remove the driver or passenger seat belt anchor plate tensioner cover and fastener. Front Seat Belt Retractor Replacement
Move the seat to the full forward position.

Center Pillar Lower Trim Panel Assembly

Procedure

Pull the trim panel toward the inside of the vehicle to disengage the retainers.
Ensure the seat belt webbing does not become trapped during installation.