LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Heating And Cooling - Repair Instructions (1 Of 2)) >> Repair Instructions >> Engine Oil Cooler Pipe Replacement (LF4 Outlet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the engine oil. Engine Oil and Oil Filter Replacement
  2. GM5876673
    NOTE:

    Left side shown, right side similar.

    Front Wheelhouse Liner Bolt- Left Side and Right Side (1) - Remove [4x]

  3. Front Compartment Air Deflector Retainer- Left Side and Right Side (2) - Remove [2x]
  4. Front Bumper Fascia Lower Stiffener Bolt- Left Side and Right Side (3) - Remove [6x]
  5. GM5876696
    NOTE:

    Left side shown, right side similar.

    Front Compartment Air Deflector- Left Side and Right Side (1) - Remove [2x]

  6. GM5862911

    Front Bumper Fascia Air Deflector Bolt (1) - Remove [4x]

  7. Front Bumper Fascia Air Deflector Retainer (2) - Remove
  8. Support the front cradle shear plate using a suitable jack.
  9. GM5877036

    Front Cradle Shear Plate Bolt (1) - Remove [4x]

  10. Front Cradle Shear Plate Nut (2) - Remove [2x]
  11. Front Crossmember Brace Bolt (3) - Remove [8x]
  12. GM5877073

    Front Wheelhouse Liner Bolt (1) - Remove [2x]

  13. GM5877068

    Position the left and right side wheelhouse liners (1) away from the front cradle sheer plate (2).

  14. Remove the front cradle sheer plate (2) from between the front bumper fascia center air deflector and the driveline and front suspension cradle and lower it from the vehicle.
  15. GM5876274

    Retaining Clip (1) - Remove

  16. Engine Oil Cooler Pipe (2) @ Engine Oil Cooler Adapter - Remove
  17. GM5876024

    Retaining Clip (1) - Remove

  18. Engine Oil Cooler Pipe (2) - Remove
scientia non olet · About LEMON Manuals