Engine Front Cover Bolt Sequence
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
| Engine Front Cover Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Engine Front Cover Bolt [5x] | - | - | First Pass: 20 N.m (15 lb ft) Second Pass: 20 N.m (15 lb ft) Final Pass: 60 degrees | Engine Front Cover Replacement |
| 2 | Engine Front Cover Bolt [17x] | - | - | Engine Front Cover Replacement | |
| 3 | Engine Front Cover Bolt | - | - | Engine Front Cover Replacement | |
| 4 | Engine Front Cover Bolt [2x] | - | - | 15 N.m (11 lb ft) | Engine Front Cover Replacement |
| 5 | Engine Front Cover Bolt [2x] | - | - | 65 N.m (48 lb ft) | Engine Front Cover Replacement |