Section 39 (Engine Mechanical - 3.6L (LF4) - Specifications)
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Fastener Specifications
- Bolt Sequence And Torque Specifications
- Automatic Transmission Flex Plate Bolt Sequence
- Camshaft Bearing Cap Bolt Sequence - Left Side
- Camshaft Bearing Cap Bolt Sequence - Right Side
- Camshaft Cover Bolt Sequence - Left Side
- Camshaft Cover Bolt Sequence - Right Side
- Charge Air Cooler Cover Bolt Sequence
- Compressor Air Intake Turbocharger Bolt Sequence - Left Side
- Compressor Air Intake Turbocharger Bolt Sequence - Right Side
- Crankshaft Bearing Cap Bolt Sequence - Inner
- Crankshaft Bearing Cap Bolt Sequence - Outer
- Crankshaft Bearing Cap Bolt Sequence - Side
- Crankshaft Rear Housing Bolt Sequence
- Cylinder Head Bolt Sequence - Left Side
- Cylinder Head Bolt Sequence - Right Side
- Engine Front Cover Bolt Sequence
- Flywheel Bolt Sequence
- Intake Manifold Bolt Sequence
- Oil Pan Bolt Sequence
- Approximate Fluid Capacities
- Engine Mechanical Specifications
- Adhesives, Fluids, Lubricants, and Sealers
- Thread Repair Specifications
- Left Cylinder Head Camshaft Cover Face
- Left Cylinder Head Front Face
- Left Cylinder Head Intake Face
- Left Cylinder Head Exhaust Face
- Left Cylinder Head Rear Face
- Right Cylinder Head Camshaft Cover Face
- Right Cylinder Head Front Face
- Right Cylinder Head Intake Face
- Right Cylinder Head Exhaust Face
- Right Cylinder Head Rear Face
- Engine Block Front
- Engine Block Left Side
- Engine Block Right Side
- Engine Block Rear
- Engine Block Bottom
- Engine Block Left Deck Face
- Engine Block Right Deck Face
- Engine Front Cover
- Upper Intake Manifold - Top
- Upper Intake Manifold - Front
- Upper Intake Manifold - Rear
- Lower Intake Manifold - Top
- Oil Pan Front
- Oil Pan Left Side
- Oil Pan Right Side
- Oil Pan Rear
- Oil Pan Top