Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Limited Slip Differential Clutch Motor Seal (2) - Install NEW
- Limited Slip Differential Clutch Motor (1) - Install
- CAUTION:
Refer to Fastener Caution .
Limited Slip Differential Clutch Motor Bolt (1) - Install and tighten [4x] - 8 N.m (71 lb in)
- Connect the limited slip differential clutch motor electrical connector.
- Verify the correct fluid level: Rear Axle Lubricant Level Inspection
- Remove the support and lower the vehicle.