Positive Crankcase Ventilation Oil Separator Cover Bolt Sequence
WARNING: This page is about a different variant/trim than selected.
| Positive Crankcase Ventilation Oil Separator Cover Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Positive Crankcase Ventilation Oil Separator Cover Bolt [11x] | - | - | 8.5 N.m (75 lb in) | POSITIVE CRANKCASE VENTILATION OIL SEPARATOR REPLACEMENT |