Compressor Air Turbocharger Bolt Sequence
WARNING: This page is about a different variant/trim than selected.
| Compressor Air Turbocharger Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Turbocharger Bolt [4x] | Yes | - | First Pass: 20 N.m (15 lb ft) Final Pass: 60 degrees |
Compressor Air Intake Turbocharger Replacement |