Balancer Shaft Housing Bolt Sequence
WARNING: This page is about a different variant/trim than selected.
| Balancer Shaft Housing Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Balancer Shaft Housing Bolt [7x] | - | - | 15 N.m (11 lb ft) | Lower Crankcase Extension Overhaul (RWD) , or Lower Crankcase Extension Overhaul (AWD) |