Automatic Transmission Flex Plate Bolt Sequence
WARNING: This page is about a different variant/trim than selected.
| Automatic Transmission Flex Plate Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Automatic Transmission Flex Plate Bolt [8x] | Yes | Yes | First Pass: 15 N.m (11 lb ft) Final Pass: 75 degrees |
Automatic Transmission Flex Plate Replacement |