Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Prepare the front bumper upper fascia (1) for installation.
Courtesy of GENERAL MOTORS COMPANY

Front Lower Grille (2) - Install
Front Lower Grille Clip (1) - Install [4x]
Courtesy of GENERAL MOTORS COMPANY

Front Grille (2) - Install
Front Grille Clip (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Short Range Radar Sensor (2) - Install [2x]

CAUTION:

Refer to Fastener Caution .

Install the 2 short range radar sensor bolts (1). Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install the 4 object sensors (1).
Courtesy of GENERAL MOTORS COMPANY

Install the 2 left and right side front side marker lamps (2).
Install and tighten the 2 left and right side front side marker lamp screws (1). Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Shutter (2) - Install
Front Bumper Shutter Bolt (1) - Install and tighten [6x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Energy Absorber (1) Install
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Install Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)