Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
The front bumper fascia will rest in place by guides on the center support upper structure.

With the aid of an assistant install the fascia. (1)
Courtesy of GENERAL MOTORS COMPANY

Reposition the front bumper fascia on the right side to gain access to the electrical connector (1).
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Install the left and right side of the front bumper fascia (1) to the front bumper fascia guides (2) and the front headlamps (3).
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Bumper Fascia Bolt (1) - Install and tighten [6x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Center Air Deflector Bolt (1) - Install and tighten [10x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Reposition the left and right side front wheelhouse liner (1) to install the left and right side upper front bumper fascia bolt (2).
Front Bumper Fascia Bolt- Left Side and Right Side (2) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Bumper Fascia Air Deflector Bolt- Left Side and Right Side (1) - Install and tighten [10x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Bumper Fascia Bolt- Left Side and Right Side (1) - Install and tighten [8x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Wheelhouse Liner Bolt- Left Side and Right Side (1) - Remove [8x]
Remove the support and lower the vehicle.