LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5311573

    Evaporative Emission Canister (1) - Install

  2. GM5311572

    Evaporative Emission Canister Air Inlet Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service 

  3. Fuel Tank Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service 
  4. Evaporative Emission Canister Purge Hose (1) - Connect - Plastic Collar Quick Connect Fitting Service 
  5. Connect the electrical connector.
  6. GM5422616

    Rear Wheelhouse Liner (5) - Install

  7. Retainer (3) - Install [2x]
  8. Push Pin (4) - Install
  9. Rear Wheelhouse Liner Bolt (2) - Install and tighten [8x] - Fastener Specifications
  10. Rear Bumper Fascia Bolt (1) - Install and tighten [2x] - Fastener Specifications
  11. Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
  12. GM5422357

    Rear Tire Front Air Deflector (2) - Install

  13. Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
  14. Lower the vehicle.
scientia non olet · About LEMON Manuals