Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Evaporative Emission Canister Air Inlet Hose (2) - Install
- Connect the quick disconnect and install the two retainers. Plastic Collar Quick Connect Fitting Service
- Install NEW tie strap (1)
Rear Wheelhouse Liner (5) - Install
- Retainer (3) - Install [2x]
- Push Pin (4) - Install
- Rear Wheelhouse Liner Screw (2) - Install and tighten [8x] - Fastener Specifications
- Rear Bumper Fascia Screw (1) - Install and tighten [2x] - Fastener Specifications
Rear Tire Front Air Deflector (2) - Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Lower the vehicle.