Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Rear Muffler Insulator (2) - Install
- Exhaust Muffler Hanger Bracket Nut (1) - Install and tighten [2x] - Fastener Specifications
Connect all electrical connectors.
- With the aid of an assistant, install the fascia. (1)
Install the 3 left and right side rear bumper fascia retainer clips (1) to the rear bumper fascia reinforcement.
Connect the electrical connectors.
- Install the rear bumper fascia (1) to the rear fascia guide.
Rear Bumper Fascia Screw (1) - Install and tighten [3x] - Fastener Specifications
Install and tighten the left and right side rear fascia bolt (1). Fastener Specifications
Install and tighten the left and right side rear fascia bolts (1). Fastener Specifications
Install and tighten the 4 left and right side rear bumper fascia screw (1). Fastener Specifications
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .