Assemble Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft Cover - Left Side

Fig 1: Exploded View Of Left Camshaft Cover Assemble Components
Courtesy of GENERAL MOTORS COMPANY

Spark Plug Shield Seal (1) - Install NEW [3x] - Using J-46103 Camshaft Actuator Valve Seal Installer
Valve Rocker Arm Oil Control Valve (2) - Install

CAUTION:

Refer to Fastener Caution .

Valve Rocker Arm Oil Control Valve Bolt (3) - Install - Valve Rocker Arm Oil Control Valve Replacement - Bank 2
Camshaft Position Sensor (4) - Install [2x]
Camshaft Position Sensor Bolt (5) - Install [2x]
- Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
- Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust

NOTE:

These components have tamper-proof connections and cannot be disassembled.

Positive Crankcase Ventilation Valve (6) - Install

Camshaft Cover - Right Side

Fig 2: Exploded View Of Right Camshaft Cover Assemble Components
Courtesy of GENERAL MOTORS COMPANY

Spark Plug Shield Seal (1) - Install NEW [3x] - Using J-46103 Camshaft Actuator Valve Seal Installer
Valve Rocker Arm Oil Control Valve (2) - Install
Valve Rocker Arm Oil Control Valve Bolt (3) - Install - Valve Rocker Arm Oil Control Valve Replacement - Bank 1
Camshaft Position Sensor (4) - Install [2x]
Camshaft Position Sensor Bolt (5) - Install [2x]
- Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
- Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust

NOTE:

These components have tamper-proof connections and cannot be disassembled.

Positive Crankcase Ventilation Valve (6) - Install