Removal Procedure
Front Bumper Fascia(1) - Remove - Front Bumper Fascia Replacement (without Blackwing) , or Front Bumper Fascia Replacement (with Blackwing)
Air Inlet Grille Panel Extension - Right Side(1) - Remove - Air Inlet Grille Panel Extension Replacement - Right Side , or Air Inlet Grille Panel Extension Replacement - Right Side (Blackwing)
- NOTE:
Left side shown, right side similar.
Front Compartment Side Sight Shield(2)Remove - Front Compartment Side Sight Shield Replacement (without Blackwing) , or Front Compartment Side Sight Shield Replacement (with Blackwing)
- NOTE:
Left side shown, right side similar.
Front Compartment Side Sight Shield- Front(2)Remove - Front Compartment Side Sight Shield Replacement - Front (Blackwing)
- NOTE:
Left side shown, right side similar.
Front Wheelhouse Liner(1) - Remove - Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing)
Windshield Washer Solvent Container(1) - Remove - Windshield Washer Solvent Container Replacement
Front Fender InsulatorRight Side(2) - (1) - Remove - Front Fender Insulator Replacement - Right Side
- NOTE:
Left side shown, right side similar.
Front Bumper Fascia Guide(3) - Remove - Front Bumper Fascia Guide Replacement
- NOTE:
Left side shown, right side similar.
Rocker Panel Molding(2) - Remove - Rocker Panel Molding Replacement , or Rocker Panel Molding Replacement (Blackwing)
Front Fender Bolt(1) - Remove [2x]
- Headlamp Bolt(2) - Remove
Apply a double layer of masking tape to the windshield to prevent damaging the windshield.
- Front Fender Bolt(1) - Remove [6x]
- Front Fender Nut(2) - Remove
Front Fender- Right Side - Remove