Rocker Panel Molding Replacement

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Reposition the front wheelhouse liner. Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing) Reposition the rear wheelhouse liner. Rear Wheelhouse Liner Replacement
1	Rocker Panel Molding Procedure Using the appropriate tool, release the retainers from the bottom edge and pull down the rocker panel molding from the body side outer panel. Using the appropriate tool, release the retainers from the top edge, pull out the rocker panel molding from the body side outer panel and remove from the vehicle.

Callout

Component Name

Preliminary Procedures

Reposition the front wheelhouse liner. Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing)
Reposition the rear wheelhouse liner. Rear Wheelhouse Liner Replacement

Rocker Panel Molding

Procedure

Using the appropriate tool, release the retainers from the bottom edge and pull down the rocker panel molding from the body side outer panel.
Using the appropriate tool, release the retainers from the top edge, pull out the rocker panel molding from the body side outer panel and remove from the vehicle.