Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTCs B2B28, B2B29 or B2B2A are not set.
- If any of the DTCs are set
- Perform the Actuator Recalibration procedure.
- Verify the DTC does not set.
- If the DTC sets,
Replace the M6PL Programmable Temperature Valve Actuator - Left.
- Go to next step: If the DTC does not set
- If the DTC sets,
- All OK.
NOTE:Verify that there are no mechanical issues with the air control door or any associated components (linkage, cams, gears, etc.) BEFORE performing the recalibration procedure.
- Go to next step: If none of the DTCs are set
- A fault is not currently present and may be an intermittent condition.