Actuator Recalibration
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not operate any HVAC controls while the system is calibrating as this may interrupt the process. If interrupted, improper HVAC performance may result.
- Connect a scan tool. Ignition ON.
- Navigate to the module diagnostics menu
- Select BCM
- Select Configuration/ Reset Functions menu
- Select HVAC Actuators Learn. Follow all on-screen instructions.
- Clear DTCs after learn is complete. Operate the system and verify proper operation.