Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
The parking brake actuator mounting surfaces of the brake caliper must be clean and free of corrosion and debris.

Rear Parking Brake Actuator Lever Seal (2) - Install NEW
Rear Parking Brake Actuator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Retainer (2) @ Rear Parking Brake Actuator - Secure
Electrical Connector (1) @ Rear Parking Brake Actuator - Connect
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Rear Parking Brake Actuator Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

{If equipped} Rear Disc Brake Pad Wear Sensor (1) @ Rear Brake Caliper - Install
{If equipped} Rear Brake Caliper Bleeder Valve Cap (2) - Install
{If equipped} Retainer (3) - Install
Install the rear tire and wheel assembly. Tire and Wheel Removal and Installation
Remove the support and lower the vehicle.
Calibrate the park brake. Park Brake Calibration