Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Radiator Air Side Baffle - Left Side (1) - Install
Radiator Air Side Baffle Retainer (1) - Install
NOTE:
Some components not shown for graphic clarity.

Radiator Air Side Baffle Retainer (3) - Install [2x]
Auxiliary Radiator Outlet Hose (2) @ Engine Radiator - Install
Auxiliary Radiator Outlet Hose Retainer (1) - Engage
Transmission Fluid Auxiliary Cooler Bracket- Left Side - Install
Auxiliary Intake Air Duct (1) - Install
Radiator Air Side Upper Baffle - Left Side (1) - Install
Radiator Air Side Upper Baffle Retainer (2) - Install [2x]
Radiator Air Side Upper Baffle Retainer (1) - Install [2x]
Radiator Upper Bracket- Left Side (2) - Install

CAUTION:

Refer to Fastener Caution .

Radiator Upper Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)
Front Bumper Fascia Lower Reinforcement- Left Side (2) - Install
Front Bumper Fascia Air Deflector Bolt- Left Side (1) - Install and tighten [6x] - Fastener Specifications
Front Bumper Fascia Air Deflector Bolt- Left Side (3) - Install and tighten [4x] - Fastener Specifications
Front Bumper Fascia Lower Stiffener Bolt- Left Side (2) - Install and tighten - Fastener Specifications
Front Bumper Fascia Bolt- Left Side (1) - Install and tighten - Fastener Specifications [6x]
Lower the vehicle.
Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (LF4 Static Fill) , or Cooling System Draining and Filling (LF4 GE 47716)