Draining Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Place a drain pan under the vehicle.
Disconnect the electrical connector.
- Remove the manual transmission fluid temperature sensor (1).
- Allow the oil to drain completely.
- Apply sealant to the manual transmission fluid temperature sensor (1). Adhesives, Fluids, Lubricants, and Sealers
- Install the manual transmission fluid temperature sensor (1) and tighten. Fastener Specifications
- Connect the electrical connector.
CAUTION:
Refer to Component Fastener Tightening Caution .