Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
If removed, inspect the reverse lockout assembly O-ring (3). Replace the reverse lockout assembly O-ring if necessary.
- Manual Transmission Reverse Gear Block out Solenoid Housing (4) - Install
- Manual Transmission Reverse Gear Block out Solenoid Housing Bolt (1) - Install and tighten - Fastener Specifications
- Manual Transmission Reverse Gear Block out Solenoid Housing Solenoid (2) - Install and tighten - Fastener Specifications
Connect the electrical connector. (1)
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .