Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Brake Pedal Assembly (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Pedal Bolt - Install and tighten [2x] 10 N.m (89 lb in)
Courtesy of GENERAL MOTORS COMPANY

Power Vacuum Brake Booster Bolt (1) - Install and tighten 22 N.m (16 lb ft) [2x]
Air Inlet Grille Panel - Install - Air Inlet Grille Panel Replacement
Courtesy of GENERAL MOTORS COMPANY

Push Rod Retainer (1) - Install NEW
Push Rod Retainer (1) @ Brake Pedal (2) - Secure
Brake Pedal Position Sensor - Install - Brake Pedal Position Sensor Replacement