Installation Procedure
- Lightly lubricate the master cylinder reservoir seals with GM approved brake fluid from a clean, sealed brake fluid container. Adhesives, Fluids, Lubricants, and Sealers
Master Cylinder Reservoir Seal (1) - Install [2x]
Master Cylinder Reservoir (1) - Install
- CAUTION:
Brake Master Cylinder Reservoir Bolt (1) - Install and tighten 8 N.m (71 lb in)
- Power Brake Booster Vacuum SensorElectrical Connector - Connect
- Brake Fluid Level Indicator Switch Electrical Connector - Connect
- Fill the brake master cylinder reservoir. Brake Master Cylinder Reservoir Filling
- Air Inlet Grille Panel - Install - Air Inlet Grille Panel Replacement