LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Automatic Transmission - 6T70 (M7U M7W), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Mount Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the range selector lever cable bracket. Range Selector Lever Cable Bracket Replacement 
  2. GM2068583Courtesy of GENERAL MOTORS COMPANY

    Remove the transmission mount to transmission fasteners (1). DISCARD the bolts.

  3. GM3232305Courtesy of GENERAL MOTORS COMPANY

    If applicable, disengage the wiring harness from the frame rail fastener stud.

    4. NOTE:

    Some vehicles may be equipped without a stud fastener.

  4. Remove the transmission mount to frame rail fasteners (1).
  5. Remove the left transmission mount (2).
scientia non olet · About LEMON Manuals