LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Automatic Transmission - 6T70 (M7U M7W), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Range Selector Lever Cable Bracket Replacement

Range Selector Lever Cable Bracket Replacement

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM2231306Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Set the park brake and chock the wheels.
  2. Remove the battery tray. Refer to Battery Tray Replacement .
1 Transmission Range Selector Lever Cable Retaining Lock
2 Transmission Range Selector Lever Cable
3 Transmission Range Selector Lever Cable Bracket Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
25 N.m (18 lb ft)
4 Transmission Range Selector Lever Cable Bracket
Procedure 
Adjust the cable. Refer to Range Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals