LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement (LFX)

Radiator Replacement (LFX)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM2770175Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the engine coolant fan shroud from the vehicle. Refer to Engine Coolant Fan Shroud Replacement (LFX) .
  3. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (GE 47716) .
  4. Remove the radiator inlet and outlet hoses from the radiator. Refer to Radiator Inlet Hose Replacement (LFX) , and Radiator Outlet Hose Replacement (LFX) .
  5. Remove the transmission fluid cooler inlet and outlet pipes from the radiator. Refer to Transmission Fluid Cooler Inlet Pipe Replacement (LFX) , and Transmission Fluid Cooler Outlet Pipe Replacement (LFX) .
  6. Remove the radiator upper mounts. Refer to Radiator Upper Mount Replacement (LFX, LF3) .
  7. Unclip and reposition the air conditioning condenser without disconnecting the air conditioning compressor or air conditioning evaporator hoses. Refer to Air Conditioning Condenser Replacement (LFX) .
1 Radiator

Procedure

  1. Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (Static Fill) Cooling System Draining and Filling (GE 47716) .
  2. Check the cooling system for leaks. Refer to Cooling System Leak Testing .