Driver or Passenger Seat Head Restraint Replacement (With W2E)

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Seat Back Cushion Finish Panel Replacement (Without W2E) Front Seat Back Cushion Finish Panel Replacement (With W2E)
1	Driver or Passenger Seat Head Restraint Procedure Release the hook and loop fasteners and J-channel around the head restraint. Remove the 2 push-in fasteners from the bottom of the front seat back pad support. Reposition the front seat back pad support (wedge up) for access to the spring type retainers. Release the spring type retainers with a hook type pic tool. Pull up to remove the head restraint.

Callout

Component Name

Preliminary Procedure
Front Seat Back Cushion Finish Panel Replacement (Without W2E) Front Seat Back Cushion Finish Panel Replacement (With W2E)

Driver or Passenger Seat Head Restraint

Procedure

Release the hook and loop fasteners and J-channel around the head restraint.
Remove the 2 push-in fasteners from the bottom of the front seat back pad support.
Reposition the front seat back pad support (wedge up) for access to the spring type retainers.
Release the spring type retainers with a hook type pic tool.
Pull up to remove the head restraint.