Front Seat Back Cushion Finish Panel Replacement (Without W2E)

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Seat Back Cushion Finish Panel Procedure Detach the seat back cushion cover bottom two bungie clips from the cushion suspension crossbar. Push the panel upward first to disengage the lower retainers. Use a flat blade tool to push up on the lower retainers and push the panel up to disengage. Move the finish panel and side clips to one side to disengage the panel from the seat frame.

Callout

Component Name

Front Seat Back Cushion Finish Panel

Procedure

Detach the seat back cushion cover bottom two bungie clips from the cushion suspension crossbar.
Push the panel upward first to disengage the lower retainers.
Use a flat blade tool to push up on the lower retainers and push the panel up to disengage.
Move the finish panel and side clips to one side to disengage the panel from the seat frame.