LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Evaporative Emission Front Pipe Replacement (AWD LFX) >> Installation Procedure

Installation Procedure

  1. GM2756271Courtesy of GENERAL MOTORS COMPANY

    Install the EVAP emission front pipe (1) to the vehicle.

  2. Install the EVAP emission front pipe (1) to the retainers (2).
  3. Connect the EVAP emission front pipe (1) to the EVAP emission canister purge pipe. Plastic Collar Quick Connect Fitting Service 
  4. Install the right rear underbody air deflector. Underbody Rear Air Deflector Replacement - Right Side (AWD)
  5. Install the right front underbody air deflector. Underbody Front Air Deflector Replacement - Right Side
  6. Lower the vehicle.
  7. GM2756272Courtesy of GENERAL MOTORS COMPANY

    Connect the EVAP emission front pipe (1) to the EVAP purge solenoid valve. Plastic Collar Quick Connect Fitting Service 

  8. Install the intake manifold cover. Intake Manifold Cover Replacement (LFX)
scientia non olet · About LEMON Manuals