LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Evaporative Emission Front Pipe Replacement (AWD LF3) >> Installation Procedure

Installation Procedure

  1. GM3336845Courtesy of GENERAL MOTORS COMPANY

    Install the EVAP emission front pipe (1) to the vehicle.

  2. Install the EVAP emission front pipe (1) to the retainers (2).
  3. Connect the EVAP emission front pipe (1) to the EVAP emission canister purge pipe. Plastic Collar Quick Connect Fitting Service 
  4. GM3336772Courtesy of GENERAL MOTORS COMPANY

    Install the EVAP emission front pipe (1) to the retainers (2).

  5. Install the air condition evaporator thermal expansion valve heat and brake pipe shield. Air Conditioning Evaporator Thermal Expansion Valve Heat and Brake Pipe Shield Replacement (LF3)
  6. Install the drivetrain and front suspension frame. Drivetrain and Front Suspension Frame Replacement
  7. Install the right rear underbody air deflector. Underbody Rear Air Deflector Replacement - Right Side (AWD)
  8. Install the right front underbody air deflector. Underbody Front Air Deflector Replacement - Right Side
  9. Lower the vehicle.
  10. GM3336553Courtesy of GENERAL MOTORS COMPANY

    Connect the EVAP emission front pipe (1) to the EVAP purge solenoid valve. Plastic Collar Quick Connect Fitting Service 

  11. Install the EVAP emission front pipe (1) to the retainer (2).
  12. Install the air cleaner outlet rear duct. Air Cleaner Outlet Rear Duct Replacement (LF3) 
scientia non olet · About LEMON Manuals